 |
For "Create front and back images separately"
Outputs a cropped image which fits the size of the scanned document.
This mode is for inserting and scanning documents such as photographs which you do not want to scratch, or documents of irregular size such as clippings of information that are difficult to load and scan directly on the scanner, in the Carrier Sheet.
If both sides are scanned, the front and back images are generated separately.
- Open the Carrier Sheet and place the document inside.
Align the top of the document so that it touches the top of the Carrier Sheet.
Place the document on its width in the center, in order not to protrude out of the Carrier Sheet.
- Load the Carrier Sheet onto the scanner.
- Place the top of the sheet with the black & white printed pattern downwards and load it in the direction of the arrow.
- When you load the Carrier Sheet, adjust the side guides so that the document inside will not skew.
- If you are using the Carrier Sheet for scanning, it is not possible to scan multiple sheets continuously. Load the sheets one by one and scan.
- Press the [SCAN] button.
Scanning starts, and the image data is generated in the specified size.
Specifies an image size when generating a scanned image.
You can select it from the following document sizes.
| Mode: Create facing pages in one image |
Mode: Create front and back images separately |
| Automatic Detection |
Automatic Detection |
| A3 (297 x 420 mm) |
- |
| - |
Carrier Sheet size (216 x 297mm) |
| - |
A4 (210 x 297mm) |
| - |
A5 (148 x 210mm) |
| - |
A6 (105 x 148mm) |
| - |
Post Card (100 x 148mm) |
| B4 (JIS) (257 x 364 mm) |
- |
| - |
B5 (JIS) (182 x 257mm) |
| - |
B6 (JIS) (128 x 182mm) |
| - |
Letter (8.5 x 11in, 216 x 279.4 mm) |
| 11 x 17 (11 x 17 in, 279.4 x 431.8 mm) |
- |
| - |
Business Card Portrait (55 x 90mm) |
| - |
Business Card Landscape (90 x 55mm) |
| - |
Custom (Can create up to 5) |
|
 |
| |
