 |
For "Create facing pages in one image"
Scans a document folded in two, in duplex mode and outputs an image facing pages joining the front and back images together. This mode scanning a document larger than A4 size, such as A3/B4/11 x 17.
- Spread the page to be scanned facing outwards and fold it in half from the center.
Fold it neatly so that the folded portion does not appear puffed. If the folded portion is not folded neatly, it may cause skewing.
- Open the Carrier Sheet and place the document inside.
Align the top of the document to the top of the Carrier Sheet, and the folded portion to the top-right corner closely.
- Load the Carrier Sheet onto the scanner.
- Place the top of the sheet with the black & white printed pattern downwards and load it in the direction of the arrow.
- When you load the Carrier Sheet, adjust the side guides so that it will not skew.
- If you are using the Carrier Sheet for scanning, it is not possible to scan multiple sheets continuously. Load the sheets one by one and scan.
- Press the [SCAN] button.
The front and back image data are set in a facing-page state and generated side by side.
Specifies an image size when generating a scanned image.
You can select it from the following document sizes.
| Mode: Create facing pages in one image |
Mode: Create front and back images separately |
| Automatic Detection |
Automatic Detection |
| A3 (297 x 420 mm) |
- |
| - |
Carrier Sheet size (216 x 297mm) |
| - |
A4 (210 x 297mm) |
| - |
A5 (148 x 210mm) |
| - |
A6 (105 x 148mm) |
| - |
Post Card (100 x 148mm) |
| B4 (JIS) (257 x 364 mm) |
- |
| - |
B5 (JIS) (182 x 257mm) |
| - |
B6 (JIS) (128 x 182mm) |
| - |
Letter (8.5 x 11in, 216 x 279.4 mm) |
| 11 x 17 (11 x 17 in, 279.4 x 431.8 mm) |
- |
| - |
Business Card Portrait (55 x 90mm) |
| - |
Business Card Landscape (90 x 55mm) |
| - |
Custom (Can create up to 5) |
|
 |
| |
